Earlex SPRAYSTATION GEMINI Manuel d'instructions télécharger pdf (Page 8)

Spraying direct from the paint tin:

1) The head unit is secured with two container catches. Gently pull outwards on these to dislodge

the catches, and remove the head unit.

2) Unscrew the Paint Pot (12) (Fig.8) and remove the Rigid Pick-Up Tube (11) from the spray gun

(Fig.8) and then insert the bare end of the 4m paint tube through the Spray Gun Connecter

Assembly (10) and fit it over the inlet (this is the one with the smaller aperture on underside of the

gun) (Fig.9).

Tip: Tube can be softened by running under hot water.

3) Ensuring that it is correctly aligned, screw the Spray Gun Connecter Assembly (10) onto the gun

>> - pushing as you twist.

4) Fit the the 4m Paint Tube (13) to the Paint Outlet (14) (Fig.10) on the motor unit - using the quick

connect fitting. Give a gentle tug on the paint tube to ensure that it is secure.

5) Set the Paint Flow Adjuster (8) on the gun to maximum by scrolling upwards (Fig.10) and then

firmly push/ clip the gun into the docking station on the motor unit until you hear a ‘click’ (the

trigger should be depressed sitting in the docking station).

6) DO NOT FIT the Air Hose (15) to motor outlet and gun at this stage yet.

Product - Set Up & Assembly

Additional items required before you start: • Drill • Cloth

Fig.8

Fig.9

Fig.10

Switch functionality

Pump

Turbine Paint speed dial Paint flow adjuster

HORIZONTAL

ROUND

VERTICAL

Large Projects

Direct from the paint tin (or Gemini Bucket)

(water-based coatings only)

DVD

IMPORTANT: Correct cleaning of this sprayer is essential for successful operation on next use. Please

refer to the How to DVD and the cleaning section of your operational manual on how to clean your

sprayer.

The Gemini can be set up for two different applications, spraying directly

from the paint tin or Gemini Bucket for large projects or from the Paint

Pot for small projects.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Earlex SPRAYSTATION GEMINI Manuel d'instructions Page 8