Earlex HV7000 Manuel d'instructions télécharger pdf (Page 7)

• Join the quick connect hose attachment to the air inlet on the spray gun.

Tip: If connection is tight loosen the quick connect fitting on the hose by unscrewing a little before

connecting to the gun, then retighten.

• Connect cordset to a grounded socket-outlet

• Turn the power on ‘I’

• Familiarise yourself with spraying technique (for detailed instruction on how to operate spray gun

refer to Spray Gun Instruction Manual supplied separately) using waste card or wood.

• In addition to the controls on the gun use the Variable Power Control (8). This will increase/

decrease airflow to optimise control of spray atomisation and coating thickness.

• When you are happy with your set up and technique, commence spraying.

NOTE: Check the turbine unit, filters and gun are clean and dry before operating.

NEVER leave the turbine unsupervised while plugged in.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Earlex HV7000 Manuel d'instructions Page 7